Canopy Series
Canopy-24
A 24-strand climbing line that runs true through any friction hitch.
PolyesterDouble Braid
- Max MBS
- 9,800 lb
- Diameters
- 7/16" – 9/16"
Application engineering
Arborist & Forestry
Climbing lines, rigging lines and lowering systems for working aloft.
Arborist rope has two jobs that fight each other: run predictably through a hitch or device, and survive bark, crotches and grit. Repurposed marine rope does neither well.
What actually governs the spec
Cover firmness and hitch behaviour. A cover that milks down after a season turns a predictable hitch unpredictable. That is a safety problem.
The problems worth solving
01
Hitches that grab the same way every time
A 24-strand cover holds its geometry under repeated cinching where a 16-strand flattens. That is a hitch you trust.
02
Shock loads in the rigging line
Negative-rigging a limb generates peak loads several times the static weight. Rigging line needs controlled elongation. A climbing line sends the spike into the anchor.
03
Inspection in a dirty environment
Grit works into a cover and abrades from the inside. High-contrast tracers make that wear obvious, so retirement runs on evidence, not a calendar.
Typical design factor
10:1 for climbing lines; 5:1 for rigging and lowering lines
A starting point, not a specification. The governing standard, the consequence of failure and the inspection regime all move this number.
Documentation supplied
- ISO 9001
- Batch certificates on every length
Specified for arborist work
Ordered by how often we recommend them for this sector — not by price.
Ascent Series
Ascent NFPA-G
NFPA 1983 General Use. Built to be trusted, not admired.
PolyesterKernmantle
- Max MBS
- 12,600 lb
- Diameters
- 7/16" – 9/16"
Meridian Series
Meridian-DB
The all-polyester double braid that outlives the hardware.
PolyesterDouble Braid
- Max MBS
- 50,000 lb
- Diameters
- 1/4" – 1-1/4"
Apex Series
Apex-12
Size-for-size stronger than steel wire rope, and it floats.
HMPE12-Strand Single Braid
- Max MBS
- 268,000 lb
- Diameters
- 1/4" – 1-1/2"